On the Cluster Member M3, upgrade to R81 with CPUSE, or perform a Clean Install of R81
| Important - You must reboot the Cluster Member after the upgrade or clean install. |
Installation Method | Instructions | ||||
---|---|---|---|---|---|
Upgrade to R81 with CPUSE Check Point Upgrade Service Engine for Gaia Operating System. With CPUSE, you can automatically update Check Point products for the Gaia OS, and the Gaia OS itself. | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Upgrade. See sk92449 for detailed steps. | ||||
Clean Install of R81 with CPUSE | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Clean Install. See sk92449 for detailed steps.
| ||||
Clean Install of R81 from scratch | Installing a Cluster Member Follow Installing a ClusterXL Cluster - only the step "Install the Cluster Members".
Installing a VRRP Cluster Member Follow Installing a VRRP Cluster - only the step "Install the VRRP Cluster Members".
|
In SmartConsole, establish SIC with the Cluster Member M3
| Important - This step is required only if you performed a Clean Install of R81 on this Cluster Member. |
Step | Instructions |
---|---|
1 | Connect with SmartConsole to the R81 Security Management Server or Main Domain Management Server that manages this Cluster. |
2 | From the left navigation panel, click Gateways & Servers. |
3 | Open the cluster object. |
4 | From the left tree, click Cluster Members. |
5 | Select the object of this Cluster Member. |
6 | Click Edit. |
7 | On the General tab, click the Communication button. |
8 | Click Reset. |
9 | In the One-time password field, enter the same Activation Key you entered during the First Time Configuration Wizard of the Cluster Member. |
10 | In the Confirm one-time password field, enter the same Activation Key again. |
11 | Click Initialize. |
12 | The Trust state field must show Trust established. |
13 | Click Close to close the Communication window. |
14 | Click OK to close the Cluster Member Properties window. |
15 | Click OK to close the Gateway Cluster Properties window. |
16 | Publish the SmartConsole session. |
In SmartConsole, install the Access Control Policy on the R81 Cluster Member M3
| Important - This step is required only if you performed a Clean Install of R81 on the Cluster Member M3. |
Step | Instructions |
---|---|
1 | Click Install Policy. |
2 | In the Install Policy window:
|
3 | The Access Control Policy installation:
|
On the R81 Cluster Member M3, enable the MVC mechanism
Step | Instructions | ||
---|---|---|---|
1 | Connect to the command line on the Cluster Member. | ||
2 | Enable the MVC Mechanism:
| ||
3 | Examine the state of the MVC Mechanism:
|
In SmartConsole, install the Access Control Policy on the R81 Cluster Member M3
Step | Instructions |
---|---|
1 | Click Install Policy. |
2 | In the Install Policy window:
|
3 | The Access Control Policy installation:
|
On each Cluster Member, examine the cluster state
Step | Instructions | ||||
---|---|---|---|---|---|
1 | Connect to the command line on each Cluster Member. | ||||
2 | Examine the cluster state in one of these ways:
|
On the Cluster Member M2, upgrade to R81 with CPUSE, or perform a Clean Install of R81
| Important - You must reboot the Cluster Member after the upgrade or clean install. |
Installation Method | Instructions | ||||
---|---|---|---|---|---|
Upgrade to R81 with CPUSE | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Upgrade. See sk92449 for detailed steps. | ||||
Clean Install of R81 with CPUSE | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Clean Install. See sk92449 for detailed steps.
| ||||
Clean Install of R81 from scratch | Installing a Cluster Member Follow Installing a ClusterXL Cluster - only the step "Install the Cluster Members".
Installing a VRRP Cluster Member Follow Installing a VRRP Cluster - only the step "Install the VRRP Cluster Members".
|
In SmartConsole, establish SIC with the Cluster Member M2
| Important - This step is required only if you performed a Clean Install of R81 on this Cluster Member. |
Step | Instructions |
---|---|
1 | Connect with SmartConsole to the R81 Security Management Server or Main Domain Management Server that manages this Cluster. |
2 | From the left navigation panel, click Gateways & Servers. |
3 | Open the cluster object. |
4 | From the left tree, click Cluster Members. |
5 | Select the object of this Cluster Member. |
6 | Click Edit. |
7 | On the General tab, click the Communication button. |
8 | Click Reset. |
9 | In the One-time password field, enter the same Activation Key you entered during the First Time Configuration Wizard of the Cluster Member. |
10 | In the Confirm one-time password field, enter the same Activation Key again. |
11 | Click Initialize. |
12 | The Trust state field must show Trust established. |
13 | Click Close to close the Communication window. |
14 | Click OK to close the Cluster Member Properties window. |
15 | Click OK to close the Gateway Cluster Properties window. |
16 | Publish the SmartConsole session. |
In SmartConsole, install the Access Control Policy on the R81 Cluster Member M3 and M2
| Important - This step is required only if you performed a Clean Install of R81 on the Cluster Member M2. |
Step | Instructions |
---|---|
1 | Click Install Policy. |
2 | In the Install Policy window:
|
3 | The Access Control Policy installation:
|
On the R81 Cluster Member M2, enable the MVC mechanism
Step | Instructions | ||
---|---|---|---|
1 | Connect to the command line on the Cluster Member. | ||
2 | Enable the MVC Mechanism:
| ||
3 | Examine the state of the MVC Mechanism:
|
In SmartConsole, install the Access Control Policy on the R81 Cluster Members M3 and M2
Step | Instructions |
---|---|
1 | Click Install Policy. |
2 | In the Install Policy window:
|
3 | The Access Control Policy installation:
|
On each Cluster Member, examine the cluster state
Step | Instructions | ||||
---|---|---|---|---|---|
1 | Connect to the command line on each Cluster Member. | ||||
2 | Examine the cluster state in one of these ways:
|
On the old Cluster Member M1, upgrade to R81 with CPUSE, or perform a Clean Install of R81
| Important - You must reboot the Cluster Member after the upgrade or clean install. |
Installation Method | Instructions | ||||
---|---|---|---|---|---|
Upgrade to R81 with CPUSE | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Upgrade. See sk92449 for detailed steps. | ||||
Clean Install of R81 with CPUSE | See Installing Software Packages on Gaia. Follow the applicable action plan for the local or central installation. In local installation, select the R81 package and perform Clean Install. See sk92449 for detailed steps.
| ||||
Clean Install of R81 from scratch | Installing a Cluster Member Follow Installing a ClusterXL Cluster - only the step "Install the Cluster Members".
Installing a VRRP Cluster Member Follow Installing a VRRP Cluster - only the step "Install the VRRP Cluster Members".
|
In SmartConsole, establish SIC with the Cluster Member M1
| Important - This step is required only if you performed a Clean Install of R81 on this Cluster Member. |
Step | Instructions |
---|---|
1 | Connect with SmartConsole to the R81 Security Management Server or Main Domain Management Server that manages this Cluster. |
2 | From the left navigation panel, click Gateways & Servers. |
3 | Open the cluster object. |
4 | From the left tree, click Cluster Members. |
5 | Select the object of this Cluster Member. |
6 | Click Edit. |
7 | On the General tab, click the Communication button. |
8 | Click Reset. |
9 | In the One-time password field, enter the same Activation Key you entered during the First Time Configuration Wizard of the Cluster Member. |
10 | In the Confirm one-time password field, enter the same Activation Key again. |
11 | Click Initialize. |
12 | The Trust state field must show Trust established. |
13 | Click Close to close the Communication window. |
14 | Click OK to close the Cluster Member Properties window. |
15 | Click OK to close the Gateway Cluster Properties window. |
16 | Publish the SmartConsole session. |
In SmartConsole, install the Access Control Policy and Threat Prevention Policy on the Cluster object
Step | Instructions |
---|---|
1 | Connect with SmartConsole to the R81 Security Management Server or Domain Management Server that manages this cluster. |
2 | From the left navigation panel, click Gateways & Servers. |
3 | Install the Access Control Policy:
|
4 | Install the Threat Prevention Policy:
|
On each Cluster Member, examine the cluster state
Step | Instructions | ||||
---|---|---|---|---|---|
1 | Connect to the command line on each Cluster Member. | ||||
2 | Examine the cluster state in one of these ways:
|
On each Cluster Member, disable the MVC mechanism
Step | Instructions | ||
---|---|---|---|
1 | Connect to the command line on each Cluster Member. | ||
2 | Disable the MVC Mechanism:
| ||
3 | Examine the state of the MVC Mechanism:
|